Under-Sink Organisers: A Pipe-Clearance Checklist
Good Kit Guide | 2026-09-25
https://goodkitguide.com/posts/under-sink-organiser-pipe-clearance/

[ ] 1. Draw the occupied space
Sketch the cupboard floor from above. Mark the pipe positions, door hinges and any fixed fittings without moving them. Measure the remaining usable rectangles rather than pretending the whole cabinet is empty.
My measurements / decision: _______________________

[ ] 2. Measure height in several places
Measure to the lowest obstruction above each proposed basket. Include the height of bottles inside the organiser, especially their spray triggers. A low tray can fit while its contents collide with the sink bowl.
My measurements / decision: _______________________

[ ] 3. Check the exit path
Slide a cardboard footprint out through the open door. A hinge or cabinet lip can obstruct a full-width tray. Consider two narrow removable caddies if one large unit cannot pass the opening.
My measurements / decision: _______________________

[ ] 4. Keep access practical
Leave existing valves and service points accessible. An organiser should be removable without disconnecting or disturbing plumbing. Keep products in their original labelled containers and follow their storage instructions.
My measurements / decision: _______________________

Reference: https://us.josephjoseph.com/products/cupboardstore-easy-access-storage-caddy-stone
This is a planning aid, not a product test. Follow the exact product instructions.